Auto Shrink Bundler

$46,748.00

SKU: TL-SFE-800NF

Click on the price quote above to request a formal quote:

Qty:

The fully auto 800NFE shrink bundler is a one-piece combo shrink bundling sealer and tunnel. The inline design makes integration into existing lines easy. Products are auto fed into the sealing area. After the seal is finished, cases move into the tunnel via a conveyor for shrinking.

The quick set Delta PLC makes machine adjustments fast and efficient. The wide 29.5-inch sealing bar is capable of sealing boxes, cases, and other large items. The tunnel can fit products up to 16 inches tall.

This machine is made to operate with two polyethylene shrink bundling rolls. One roll of film is held in a film carriage above the products and another below. The powered infeed rollers smoothly and evenly dispense film as it passes on the conveyor.

The hot knife sealing bar is fully adjustable to accommodate up to 6 mil bundling film. As the hot knife closes, a pneumatic product hold-down keeps film and products in place during the seal. Upon completion, the sealing knife and hold down raise and the products are released to the tunnel.

The shrink tunnel features a metal mesh conveyor belt for even airflow and reduced film tact. The shrink tunnel has a maximum temperature of 450 degrees Fahrenheit. The tunnel chamber height is 18 inches, we do not recommend products much over 16 inches in height. The top blowers can cause burn holes on film too close to the blower motors. The tunnel exit features an adjustable cooling fan to help speed up cooling upon tunnel exit.

Emergency stops are located on the infeed conveyor and control panel. See the list of features below and call us if you have any questions. We try to keep (1) bundler in stock. If not in stock, standard lead times are 12 – 16 weeks. Ask a sales associate about the current stock today!

Machine Features

Seal Bar Width	29.5 Inches
Seal Bar Height	18 Inches
Maximum Seal Width	28 Inches
Maximum Seal Height	16 Inches
Machine Dimensions	53”Wx136”Lx84”H
Crated Dimensions	142” L x 63” W x 84” H
Control Panel	Delta Touchscreen
Power Requirements	220/ Volts, 75 Amps, Three Phase
Air Requirements	3 CFM @ 80 psi
Machine weight	2,800 Lbs.
Maximum Film Width	29”